Satin Titanlak enamel colors 125ml

Synthetic enamel based on high solids technology, special for lacquering and enamelling. Easy application obtaining satin finishes of great finesse, soft touch and excellent lacquered appearance. Resistant to friction, scratches, soaps, liquor stains, juices, oils, etc. Very washable

DRYING: 4 - 5 hours
APPLICATION METHODS: Brush, roller and gun
FINISH: Satin

More details

New

4,95 €

- +

Add to wishlist

Add to compare

 
More info

Description
Synthetic enamel based on high solids technology, special for lacquering and enamelling. Easy application obtaining satin finishes of great finesse, soft touch and excellent lacquered appearance. Resistant to friction, scratches, soaps, liquor stains, juices, oils, etc. Very washable

Application Fields
Exteriors and interiors. To protect and beautify all kinds of wood, metal surfaces (furniture, shelves, doors, windows, radiators, etc.)

Technical data
Nature Alkyd urethane high solids.
Satin Finish Color (UNE 48073) White and color range
Density (UNE EN ISO 2811) White: 1.48 - 1.52 Kg / l, Black: 1.35 - 1.40 Kg / l, Colors: 1.36 - 1.50 Kg / l Yield 12 - 14 m2 / l (40 - 45µ)
Drying at 23 ° C 60% RH (UNE 48301) 4 - 5 hours
Repainted at 23 ° C 60% RH (UNE 48283) 18-24 hours
Application methods Brush, roller and gun
Cleaning of Synthetic and Oily Solvent utensils, Odorless Solvent or Mineral Turpentine.
Flash Point (UNE EN ISO 3679) 40 - 41 ºC
Volume Solids (UNE 48090) 60 - 63% VOC (UNE EN 11890-2) 2.004 / 42 / IIA (d) (400/300) Max. VOC 300 g / l
Variations in temperature, humidity, thickness or depending on the type of support, etc., may cause changes in drying, performance, etc. two
Certifications Multipurpose Preparation Cod. 06A and Titanlak Satin Lacquer Enamel Cod. 011 has the classification of Reaction to Fire B - s1, d0 according to UNE EN 13501-1: 2007 + A1: 2010, provided they are applied together as a primer system more finish, on fire reaction materials A1.

How to use
GENERAL RECOMMENDATIONS: Stir well in the container. The surfaces to be painted should be clean, dry and primed properly. Remove any dirt, grease, badly adhered rust and coatings using solvent or stripper, as needed. The high solids enamels leave a thicker film. Thicknesses greater than those recommended should not be applied to avoid drying and surface appearance problems. If it is desired to modify the degree of satin of our Titanlak Lacquer Enamel in a given application, we recommend mixing it with Matte or Bright Titanlux Enamel according to needs. For outdoor applications, we do not recommend blending with Titanlux Matte Enamel. At support temperatures below 10 ° C and with low yields the repainting time is extended. Check that the drying is correct before repainting. IMPORTANT: it reaches its final degree of satin after approximately 3 days, depending on the ambient temperature (it contains less solvents). The white color applied to radiators can yellow to a greater or lesser degree depending on the temperature reached. In all cases for: Interior: finish with 1 or 2 hands of Titanlak Lacquer Enamel. Exterior: finish with 2 or 3 hands of Titanlak Lacquer Enamel. SURFACES NOT PREPARED: Wood: Sand the wood in the direction of the grain, clean thoroughly, remove resin or resin secretions and kill live edges. Apply TITAN Protector, TITAN Sealer or Multipurpose Preparation according to needs. Iron: Titanlux Synthetic Minio, TITAN Electrolytic Lead Minio Paint or Multipurpose Preparation. For outdoor work, two coats of the selected primer will be necessary. Indoors, one layer will be enough. Other supports: Consult. MAINTENANCE SURFACES ALREADY PAINTED IN GOOD CONDITION: Wash, sand smoothly and apply directly 1 or 2 coats of Lacquer Enamel Titanlak. MAINTENANCE SURFACES ALREADY PAINTED IN BAD CONDITION: Remove completely and proceed as on unprepared surfaces.

Precautions

Before using the product, read the package instructions carefully. For more information consult Safety Data Sheet.

Write a review

Satin Titanlak enamel colors 125ml

Synthetic enamel based on high solids technology, special for lacquering and enamelling. Easy application obtaining satin finishes of great finesse, soft touch and excellent lacquered appearance. Resistant to friction, scratches, soaps, liquor stains, juices, oils, etc. Very washable

DRYING: 4 - 5 hours
APPLICATION METHODS: Brush, roller and gun
FINISH: Satin

Write a review

 
Custom tab

This is a custom block edited from admin panel.You can insert any content here.

Product Options
Carta Colores
 
 
1414 Marfil
 
 
 
1424 Crema
 
 
 
1434 Vainilla
 
 
 
1471 Melocotón
 
 
 
1473 Avellana
 
 
 
1464 Gamuza
 
 
 
1404 Ocre
 
 
 
1402 Amarillo real
[Add 0,21 €]
 
 
1415 Naranja
[Add 0,21 €]
 
 
1405 Rojo China
[Add 0,21 €]
 
 
1417 Rojo Inglés
 
 
 
1425 Burdeos
[Add 0,21 €]
 
 
1407 Marrón
 
 
 
1474 Mora
 
 
 
1423 Azul Luminoso
 
 
 
1403 Azul Marino
 
 
 
1475 Almendra
 
 
 
1426 Verde Primavera
[Add 0,21 €]
 
 
1406 Verde Bosque
 
 
 
1400 Blanco
 
 
 
1401 Negro
 
 
 
1421 Gris perla
 
  
  Quantity:

15 Other products in the same category

Compare 0