Water Varnish Ecological Satin Decoration 750ml

Application Fields
For the protection and decoration of all kinds of wooden surfaces.

Technical data
Nature Acrylic - polyurethane.
Satin Finish
Color (UNE EN ISO 11664-4) Colorless and color gamut.
Density (UNE EN ISO 2811-1) 1.04 - 1.08 kg / l.
Performance (UNE 48282) 10 - 16 m² / l.
Drying at 23 ° C 60% RH (UNE 48301) 30-60 minutes / dry touch: 15-30 minutes.
Repainted at 23 ° C 60% RH (UNE 48283) 4 - 6 hours.
Application Methods Brush and roller.
Dilution 5% 1st layer for unvarnished wood.
Water diluent.
Application Conditions, RH <80% + 10 ° C - + 30 ° C.
Volume Solids (UNE EN ISO 3233-3) 27 - 30%.
VOC (UNE EN ISO 11890-2) 2.004 / 42IIA (e) (150/130) Max VOC 65 g / l.
Presentation 2.5 l, 750 ml and 250 ml.

Certifications
VOC Emission ISO 16000-6: 2006: A +
Toy safety Migration of certain elements UNE-EN 71-3.

How to use
GENERAL RECOMMENDATIONS:
Stir well in the container. Surfaces must be smooth (sanded), degreased, clean and dry. Apply in thin layers and sand gently between layers. The moisture content of the wood should not exceed 12% in hardwood and 15% in softwood. Do not varnish in full sun or with dew.

SURFACES NOT PREPARED:
Sand the wood in the direction of the grain, clean thoroughly, remove resins or secretions of resins and kill live edges. Old varnished wood: it is essential to completely remove the dry and gray surface by sanding or brushing thoroughly until the wood is exposed in good condition. Indoors: apply 2 or 3 coats. Outdoors: For better protection of wood outdoors, apply Titanxyl Total Ultra Protection or Titanxyl
Lasur Ultra Bottom, ending with 2 or 3 layers of Varnish to the Ecological Water Decoration.
To restore interior wood with woodworm problems, apply a layer of Titanxyl Matacarcomas to the Water, with mold problems apply a layer of Titanxyl Total Ultra Protection or Titanxyl Lasur Ultra Bottom.
Resinous and tropical woods: they can prevent drying. Thoroughly degrease with TITAN Yacht Diluent to remove resin. Apply a first coat on a reduced surface and observe. If the exudation of resin persists, consult the Technical Service, but finish with 2 - 3 layers of Varnish to the Ecological Water Decoration.
The hue, intensity of the final color depend on the type, color and thickness of the wood as well as the number of layers. If the desired color has been achieved with the 1st layer, finish with colorless.
MAINTENANCE SURFACES ALREADY PAINTED IN GOOD CONDITION:
Sand gently, remove the dust generated and apply 1 or 2 coats according to the state of the surface.
When old varnishes are catalytic or polyurethane, it is essential to sand the entire surface thoroughly, to remove them completely.
MAINTENANCE SURFACES ALREADY PAINTED IN BAD CONDITION:
Remove completely and proceed as on unprepared surfaces.

Precautions
Before using the product, read the package instructions carefully. For more information consult Safety Data Sheet.
Store tightly closed containers sheltered from sources of heat and temperature below zero. Storage: 36 months in original unopened container.

Waste management:
Follow local legal regulations. Help protect the environment, do not dispose of waste in the drain, deposit it in
The nearest recycling center.
Calculate the amount of product you will need and thus avoid waste and extra cost.
Store excess product well stored for new use.
Contains: IPBC to protect the initial properties of the treated article.