Smooth water-satin oxiron 750ml
Quick-drying, water-resistant, multi-adhesive, anti-rust enamel, direct application on steel and oxide, aluminum and galvanized without the need for prior priming. Provides excellent weather resistance of up to 15 years and a satin finish with great adhesion, flexibility and resistance to shocks. With film preservative against fungi and algae.
Good brushability and coverage. Unbeatable barrier layer against humidity. Without smell.
The use of Oxirón Liso al Agua provides significant savings in time, since it can be repainted after 4 hours, finishing most jobs in a single day. It offers high quality finishes.
Oxiron Smooth to Water offers the best performance on the market against corrosion, in its category (minimum film thickness and with a single product).
Triple action: neutralizes, repairs and protects.
How to use
Surfaces to be painted must be degreased, dry and free of loose rust, calamine and dirt.
NOT PREPARED SURFACES:
Steel: can be applied directly without primer. If the surface is rusty, sand lightly to confer roughness to the substrate, removing badly adhered oxide. In medium corrosion environments, steel must be sanded to ST 2 grade of the UNE EN ISO 8501-1 standard. Under these conditions, a minimum thickness of 70 microns (2 dry coats) will be necessary.
Aluminum and galvanized steel: Sand until matting and apply directly Oxirón Liso Agua.
Wood: TITAN Water Multipurpose Preparation or TITAN Water Sealer.
Other supports: Consult.
MAINTENANCE OF SURFACES ALREADY PAINTED IN GOOD CONDITION:
Wash with soapy water and let dry, sand lightly and apply Oxiron Smooth to Water directly.
MAINTENANCE SURFACES ALREADY PAINTED IN POOR CONDITION:
Remove rust and poorly adhered paint coatings using emery sandpaper or a barbed brush. To apply the finish, proceed as on unprepared surfaces.