Oxiron forges water 750ml
Antirust metallic enamel, multi-adherent to water, quick drying and direct application on steel and oxide, aluminum and galvanized without the need for prior priming. It provides excellent weather resistance of up to 15 years and a forged-looking metallic finish, with great adhesion, flexibility and resistance to shocks. With film preservative against fungi and algae.
Good brushability and coverage. Unbeatable barrier layer against humidity. Without smell.
The use of Oxirón Forja Agua provides significant savings in time, since it can be repainted after 4 hours, completing most jobs in a single day. It offers high quality finishes.
Full guarantee against corrosion according to the UNE EN ISO 12944 standard. Guaranteed by an external laboratory test.
How to use
Surfaces to be painted must be degreased, dry and free of loose rust, calamine and dirt.
NOT PREPARED SURFACES:
Steel: can be applied directly without primer. If the surface is rusty, sand lightly to confer roughness to the substrate, removing badly adhered oxide. In medium corrosion environments, steel must be sanded to ST 2 grade of the UNE EN ISO 8501-1 standard. Under these conditions, a minimum thickness of 100 microns (3 dry coats) will be necessary.
Aluminum and galvanized steel: Sand until matting and apply directly Oxirón Forja Agua.
Wood: TITAN Water Multipurpose Preparation or TITAN Water Sealer.
Other supports: Consult.
MAINTENANCE OF SURFACES ALREADY PAINTED IN GOOD CONDITION:
Wash with soapy water and let dry, sand lightly and directly apply Oxirón Forja Agua.
MAINTENANCE SURFACES ALREADY PAINTED IN POOR CONDITION:
Remove rust and poorly adhered paint coatings using emery sandpaper or a barbed brush. For the application of finished, proceed as on unprepared surfaces.